Can be used on any flat, smooth, clean surface, indoors or out.
13.5cm x 11.6cm
- Clean the area where the decal will be placed. DO NOT USE WINDOW CLEANER! Wash with 30/70 dish soap and water. Rinse well and dry well with a lint free cloth. Do not use citrus cleaner or any other commercial cleaners as they are designed to remove adhesives and will interfere with the decal's adhesive and your decal will fall off.
- Peel the protective backing plastic from the decal.
- Carefully place decal flat in desired location and begin to lightly rub down vinyl evenly from the center, from top to bottom until you reach the end using your fingers. Avoid bubbles and creases by going slowly and applying evenly.
- Press down firmly with your fingers then use a credit card or something similar to smooth down your decal, making sure that it is completely stuck to the surface.
- Carefully and slowly, remove the transfer plastic from your decal, making sure that your decal is stuck to the surface. If you see part of the decal does not release from the transfer plastic, press it back down to the surface and repeat the process above. Removing the transfer plastic at a sharp angle helps.
- If you do end up with bubbles, tiny bubbles will likely disappear by themselves. Pop any large bubbles with a pin and rub. Warming the decal with a hair dryer will help in rubbing out bubbles and creases.
- To remove, simply heat with a hair dryer and peel it off.